Chapter 3 Reading Materials

Hello ! The presentation slides for Chapter 3 are as follows:

Summary Slides (Beginner)
http://dl.dropbox.com/u/55776142/CCNA2_Chp3_Dyn_route_V1.ppt
Slightly Detailed Slides (Intermediate)
http://dl.dropbox.com/u/55776142/Expl_Rtr_chapter_03_Dynamic.ppt
Detailed Slides (Advanced)
http://ibizzone.ite.edu.sg/elearning/file.php/38/Internetworking/Exp_2-Ch_3-Intro_Dynmanic_revised.pdf
Quiz
http://ibizzone.ite.edu.sg/elearning/mod/quiz/view.php?id=2903

Follow your skill level and go through the slides. If you feel comfortable, go through the higher level slides as well and finally, attempt the quiz.

Steps in designing a computer network

1) Determine the physical network layout
2) List down the network address and default subnet mask
3) Determine the minimum subnets and hosts per subnet to be supported
4) If you are implementing subnetting, you need a new subnet mask.
5) Use 2^N and 2^H-2 to determine the subnet bits and hosts bits to use
4) Derive the new subnet mask.
5) List down the network addresses, range of usable host ip addresses and broadcast addresses
6) Assign the network addresses to each LAN segment
7) Assign and configure the host ip addresses to the host devices in each LAN segment

Your lab practice for today/tomorrow

Please click on the link below and setup the network as shown in the diagram.
http://dl.dropbox.com/u/55776142/Network%20Setup.pdf

You are required to setup all routers with the hostname and passwords. All PCs should be able to ping one another.

Good luck.

Chapter 2 Instructor Slides Posted

Hi,

The instructor slides for chapter 2 are posted here.

http://dl.dropbox.com/u/55776142/Chapter%202_Keypoint.pdf

Chapter 1 and 2 Textbook Questions

Today we shall go through the chapter 1 and 2 MCQs from the textbook.

http://dl.dropbox.com/u/55776142/Chapter%201_Textbook_Questions.pdf
http://dl.dropbox.com/u/55776142/Chapter2_Textbook_Questions.pdf

Chapter 2 Reading Materials

Hello ! The presentation slides for Chapter 2 are as follows:

Summary Slides (Beginner)
http://dl.dropbox.com/u/55776142/CCNA2_Chp2_Static_route_V1.ppt
Slightly Detailed Slides (Intermediate)
http://dl.dropbox.com/u/55776142/Expl_Rtr_chapter_02_Static.ppt
Detailed Slides (Advanced)
http://ibizzone.ite.edu.sg/elearning/mod/resource/view.php?id=2652
Quiz
http://ibizzone.ite.edu.sg/elearning/mod/quiz/view.php?id=2902

Follow your skill level and go through the slides. If you feel comfortable, go through the higher level slides as well and finally, attempt the quiz.

After learning NWF and INTT, you become IP Man (叶问）

In this network,

http://dl.dropbox.com/u/55776142/Assymetric%20Routing.pkt

You configure static routes such that when you ping PC1 to PC2, the ICMP request packets travel from Router A, Router B and Router D. On the other hand, the ICMP reply packets travel from Router D, Router C and Router A. The forward and return paths are different. This is known as assymetric routing. Kungfu routing.

Try this during the next lesson.